Copyright © 2024 Leonhart Yan All Rights Reserved. Copyright © 2024 Leonhart Yan All Rights Reserved. Copyright © 2024 Leonhart Yan All Rights Reserved. Copyright © 2024 Leonhart Yan All Rights Reserved.
Fabrication Portfolio:
Deconstruction
手工制造作品集：解构
Fall 24 Leonhart Yan
Notion Blog Posts: Click Here!
My Full Portfolio/完整作品集:
leonhartyan.com
If the interactive background doesn't load, please be patient or reload the page!
Copyright © 2024 Leonhart Yan, All Rights Reserved.
Plagiarism/copying/unauthorized commercial usages will be prosecuted!
Project 1:
Priority Express
项目：优先配送
Description:
I designed my own personal logo before
and I just wanted to laser-cut it. But, things changed when I actually printed them out…
I used laser cutting to cut the cardboard provided. Those cardboard were USPS Priority boxes. And I really liked the color and texture of it. I wanted to deconstruct and redesign my own logo with some imagination… to make a crown. The smaller one was still loyal to my original design of the logo. Then, I made a crown that looked like a space airship. So… I just made an airship at last, which was really perfectly combined with USPS boxes and mailing theme.
我曾设计过自己的个人标志，并想用激光切割机切割出来。但实际做出来后，情况就变了…… 我用激光切割了包裹纸板——美国邮政优先箱的包装盒。我特别喜欢它的颜色和质感。我决定发挥创意，将个人标识解构重组……并打造一顶皇冠。较小的皇冠仍忠于原始标识设计，随后我又设计出太空飞艇造型的皇冠。最终，我直接制作了一艘飞艇——这与USPS箱子及邮寄主题可谓完美契合。
Materials Used:
Cardboards(USPS mailbox), Glue
Process Images:
Project 2: Micro ITX
项目：微型ITX
Description:
The shape of ITP/IMA Floor’s new PC case. It was really cool and I thought I could redesign and deconstruct it with my impressions.
I developed the circuit and codes and injected the codes into my Arduino. It is a press counter by counting the press of the key switch. The number will be shown on the oled screen. I also soldered the PCB. After several tries, I found that the PCB solder work was not working. I had to use a breadboard to fulfill the circuit requirement. Very pitty. But finally, I
deconstructed
the PC to the Micro ITX.
ITP/IMA Floor新款电脑机箱的造型。它真的很酷，我认为我可以根据自己的理解进行重新设计和拆解。我开发了电路和代码，并将代码注入到我的Arduino中。这是一个通过计数按键开关的按压次数来工作的按压计数器。计数结果将显示在OLED屏幕上。我还尝试焊接PCB板，但多次尝试后发现焊接效果不佳，最终不得不使用面包板来满足电路需求，实在遗憾。不过最终我成功将机箱的造型变成了迷你的“ITX”。
Materials Used:
Wood Boards, Acrylics, Arduino Nano 33 IoT, ROG NX Red Switch, OLED screen
Process Images:
Project 3: Unreal Engine/24V V8
项目：虚幻引擎/8缸24伏
Description:
As a final project, I had the brainstorm to refactor something really cool: the engine. Because the vertical linear motion of a solenoid valve reminds me of the motion of a piston in a cylinder (although they move in completely different ways). This was a kind of reconstruction for me, re-creating it in a way that is similar but not exactly the same. So I carefully designed the appearance and the circuitry, and reconstructed the eight-cylinder engine with solenoid valves that existed in my mind. The name of this project could be Unreal Engine, because it's apt. But it could just as well be called for its engine parameters: 24 volts, V8.
作为最终项目，我灵光乍现地决定重构一个真正酷炫的东西：引擎。因为电磁阀的垂直线性运动让我联想到气缸内活塞的运动（尽管它们的运动方式截然不同）。这对我而言是一种重建——以相似但并非完全相同的方式重现它。于是我精心设计外观与电路，用脑海中的电磁阀构想重构了八缸引擎。这个项目可以命名为“虚幻引擎”，因为这个名字恰如其分。但同样可以根据引擎参数命名：24伏特，V8。
Materials Used:
Wood Boards, Acrylics, Arduino Nano 33 IoT, Solenoid Magnets, Relays
Process Images: